CentOS7 64位下MySQL5.7安装与配置（YUM安装）
浏览数 193411
赞
(0)
安装环境：CentOS7 64位 MINI版，安装MySQL5.7
1、配置YUM源
在MySQL官网中下载YUM源rpm安装包：http://dev.mysql.com/downloads/repo/yum/
# 下载mysql源安装包
shell> wget http://dev.mysql.com/get/mysql57-community-release-el7-8.noarch.rpm
# 安装mysql源
shell> yum localinstall mysql57-community-release-el7-8.noarch.rpm
检查mysql源是否安装成功
[root@localhost software]# yum repolist enabled | grep "mysql.*-community.*"
mysql-connectors-community/x86_64 MySQL Connectors Community 42
mysql-tools-community/x86_64 MySQL Tools Community 53
mysql57-community/x86_64 MySQL 5.7 Community Server 227
[root@localhost software]#
看到上图所示表示安装成功。
可以修改vim /etc/yum.repos.d/mysql-community.repo源，改变默认安装的mysql版本。比如要安装5.6版本，将5.7源的enabled=1改成enabled=0。然后再将5.6源的enabled=0改成enabled=1即可。改完之后的效果如下所示：
2、安装MySQL
shell> yum install mysql-community-server
3、启动MySQL服务
shell> systemctl start mysqld
查看MySQL的启动状态
shell> systemctl status mysqld
● mysqld.service - MySQL Server
Loaded: loaded (/usr/lib/systemd/system/mysqld.service; disabled; vendor preset: disabled)
Active: active (running) since 五 2016-06-24 04:37:37 CST; 35min ago
Main PID: 2888 (mysqld)
CGroup: /system.slice/mysqld.service
└─2888 /usr/sbin/mysqld --daemonize --pid-file=/var/run/mysqld/mysqld.pid
6月 24 04:37:36 localhost.localdomain systemd[1]: Starting MySQL Server...
6月 24 04:37:37 localhost.localdomain systemd[1]: Started MySQL Server.
4、开机启动
shell> systemctl enable mysqld
shell> systemctl daemon-reload
5、修改root本地登录密码
mysql安装完成之后，在/var/log/mysqld.log文件中给root生成了一个默认密码。通过下面的方式找到root默认密码，然后登录mysql进行修改：
[root@localhost software]# grep 'temporary password' /var/log/mysqld.log
2017-12-01T01:19:58.675829Z 1 [Note] A temporary password is generated for root@localhost: BEr)Xjft.6Bw
[root@localhost software]# mysql -uroot -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.7.20
...
mysql> alter user 'root'@'localhost' identified by 'onewayPHP@2017';
Query OK, 0 rows affected (0.00 sec)
或者
mysql> set password for 'root'@'localhost'=password('onewayPHP@2017');
注意：mysql5.7默认安装了密码安全检查插件（validate_password），默认密码检查策略要求密码必须包含：大小写字母、数字和特殊符号，并且长度不能少于8位。否则会提示ERROR 1819 (HY000): Your password does not satisfy the current policy requirements错误，如下图所示：
mysql> alter user 'root'@'localhost' identified by 'onewayphp2017';
ERROR 1819 (HY000): Your password does not satisfy the current policy requirements
通过msyql环境变量可以查看密码策略的相关信息：
mysql> show variables like '%password%';
+---------------------------------------+--------+
| Variable_name | Value |
+---------------------------------------+--------+
| default_password_lifetime | 0 |
| disconnect_on_expired_password | ON |
| log_builtin_as_identified_by_password | OFF |
| mysql_native_password_proxy_users | OFF |
| old_passwords | 0 |
| report_password | |
| sha256_password_proxy_users | OFF |
| validate_password_check_user_name | OFF |
| validate_password_dictionary_file | |
| validate_password_length | 8 |
| validate_password_mixed_case_count | 1 |
| validate_password_number_count | 1 |
| validate_password_policy | MEDIUM |
| validate_password_special_char_count | 1 |
+---------------------------------------+--------+
14 rows in set (0.00 sec)
validate_password_policy：密码策略，默认为MEDIUM策略
validate_password_dictionary_file：密码策略文件，策略为STRONG才需要
validate_password_length：密码最少长度
validate_password_mixed_case_count：大小写字符长度，至少1个
validate_password_number_count ：数字至少1个
validate_password_special_char_count：特殊字符至少1个
上述参数是默认策略MEDIUM的密码检查规则。
共有以下几种密码策略：
策略 检查规则
0 or LOW Length
1 or MEDIUM Length; numeric, lowercase/uppercase, and special characters
2 or STRONG Length; numeric, lowercase/uppercase, and special characters; dictionary file
MySQL官网密码策略详细说明：http://dev.mysql.com/doc/refman/5.7/en/validate-password-options-variables.html#sysvar_validate_password_policy
修改密码策略
在/etc/my.cnf文件添加validate_password_policy配置，指定密码策略
# 选择0（LOW），1（MEDIUM），2（STRONG）其中一种，选择2需要提供密码字典文件
validate_password_policy=0
如果不需要密码策略，添加my.cnf文件中添加如下配置禁用即可：
validate_password = off
重新启动mysql服务使配置生效：
systemctl restart mysqld
6、添加远程登录用户
默认只允许root帐户在本地登录，如果要在其它机器上连接mysql，必须修改root允许远程连接，或者添加一个允许远程连接的帐户，为了安全起见，我添加一个新的帐户：
mysql> GRANT ALL PRIVILEGES ON *.* TO 'yangxin'@'%' IDENTIFIED BY 'Yangxin0917!' WITH GRANT OPTION;
7、配置默认编码为utf8
修改以前如下所示：
mysql> show variables like '%character%';
+--------------------------+----------------------------+
| Variable_name | Value |
+--------------------------+----------------------------+
| character_set_client | utf8 |
| character_set_connection | utf8 |
| character_set_database | latin1 |
| character_set_filesystem | binary |
| character_set_results | utf8 |
| character_set_server | latin1 |
| character_set_system | utf8 |
| character_sets_dir | /usr/share/mysql/charsets/ |
+--------------------------+----------------------------+
8 rows in set (0.00 sec)
修改/etc/my.cnf配置文件，在[mysqld]下添加编码配置，如下所示：
[mysqld]
character_set_server=utf8
init_connect='SET NAMES utf8'
重新启动mysql服务，查看数据库默认编码如下所示：
mysql> show variables like '%character%';
+--------------------------+----------------------------+
| Variable_name | Value |
+--------------------------+----------------------------+
| character_set_client | utf8 |
| character_set_connection | utf8 |
| character_set_database | utf8 |
| character_set_filesystem | binary |
| character_set_results | utf8 |
| character_set_server | utf8 |
| character_set_system | utf8 |
| character_sets_dir | /usr/share/mysql/charsets/ |
+--------------------------+----------------------------+
8 rows in set (0.00 sec)
——————————————————————————————
默认配置文件路径：
配置文件：/etc/my.cnf
日志文件：/var/log/mysqld.log
服务启动脚本：/usr/lib/systemd/system/mysqld.service
socket文件：/var/run/mysqld/mysqld.pid
==========================================
我在阿里云香港的机器上使用此方法安装，在修改root密码和默认编码后，重启mysql出现问题，报错
1、配置YUM源
在MySQL官网中下载YUM源rpm安装包：http://dev.mysql.com/downloads/repo/yum/
# 下载mysql源安装包
shell> wget http://dev.mysql.com/get/mysql57-community-release-el7-8.noarch.rpm
# 安装mysql源
shell> yum localinstall mysql57-community-release-el7-8.noarch.rpm
检查mysql源是否安装成功
[root@localhost software]# yum repolist enabled | grep "mysql.*-community.*"
mysql-connectors-community/x86_64 MySQL Connectors Community 42
mysql-tools-community/x86_64 MySQL Tools Community 53
mysql57-community/x86_64 MySQL 5.7 Community Server 227
[root@localhost software]#
看到上图所示表示安装成功。
可以修改vim /etc/yum.repos.d/mysql-community.repo源，改变默认安装的mysql版本。比如要安装5.6版本，将5.7源的enabled=1改成enabled=0。然后再将5.6源的enabled=0改成enabled=1即可。改完之后的效果如下所示：
2、安装MySQL
shell> yum install mysql-community-server
3、启动MySQL服务
shell> systemctl start mysqld
查看MySQL的启动状态
shell> systemctl status mysqld
● mysqld.service - MySQL Server
Loaded: loaded (/usr/lib/systemd/system/mysqld.service; disabled; vendor preset: disabled)
Active: active (running) since 五 2016-06-24 04:37:37 CST; 35min ago
Main PID: 2888 (mysqld)
CGroup: /system.slice/mysqld.service
└─2888 /usr/sbin/mysqld --daemonize --pid-file=/var/run/mysqld/mysqld.pid
6月 24 04:37:36 localhost.localdomain systemd[1]: Starting MySQL Server...
6月 24 04:37:37 localhost.localdomain systemd[1]: Started MySQL Server.
4、开机启动
shell> systemctl enable mysqld
shell> systemctl daemon-reload
5、修改root本地登录密码
mysql安装完成之后，在/var/log/mysqld.log文件中给root生成了一个默认密码。通过下面的方式找到root默认密码，然后登录mysql进行修改：
[root@localhost software]# grep 'temporary password' /var/log/mysqld.log
2017-12-01T01:19:58.675829Z 1 [Note] A temporary password is generated for root@localhost: BEr)Xjft.6Bw
[root@localhost software]# mysql -uroot -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.7.20
...
mysql> alter user 'root'@'localhost' identified by 'onewayPHP@2017';
Query OK, 0 rows affected (0.00 sec)
或者
mysql> set password for 'root'@'localhost'=password('onewayPHP@2017');
注意：mysql5.7默认安装了密码安全检查插件（validate_password），默认密码检查策略要求密码必须包含：大小写字母、数字和特殊符号，并且长度不能少于8位。否则会提示ERROR 1819 (HY000): Your password does not satisfy the current policy requirements错误，如下图所示：
mysql> alter user 'root'@'localhost' identified by 'onewayphp2017';
ERROR 1819 (HY000): Your password does not satisfy the current policy requirements
通过msyql环境变量可以查看密码策略的相关信息：
mysql> show variables like '%password%';
+---------------------------------------+--------+
| Variable_name | Value |
+---------------------------------------+--------+
| default_password_lifetime | 0 |
| disconnect_on_expired_password | ON |
| log_builtin_as_identified_by_password | OFF |
| mysql_native_password_proxy_users | OFF |
| old_passwords | 0 |
| report_password | |
| sha256_password_proxy_users | OFF |
| validate_password_check_user_name | OFF |
| validate_password_dictionary_file | |
| validate_password_length | 8 |
| validate_password_mixed_case_count | 1 |
| validate_password_number_count | 1 |
| validate_password_policy | MEDIUM |
| validate_password_special_char_count | 1 |
+---------------------------------------+--------+
14 rows in set (0.00 sec)
validate_password_policy：密码策略，默认为MEDIUM策略
validate_password_dictionary_file：密码策略文件，策略为STRONG才需要
validate_password_length：密码最少长度
validate_password_mixed_case_count：大小写字符长度，至少1个
validate_password_number_count ：数字至少1个
validate_password_special_char_count：特殊字符至少1个
上述参数是默认策略MEDIUM的密码检查规则。
共有以下几种密码策略：
策略 检查规则
0 or LOW Length
1 or MEDIUM Length; numeric, lowercase/uppercase, and special characters
2 or STRONG Length; numeric, lowercase/uppercase, and special characters; dictionary file
MySQL官网密码策略详细说明：http://dev.mysql.com/doc/refman/5.7/en/validate-password-options-variables.html#sysvar_validate_password_policy
修改密码策略
在/etc/my.cnf文件添加validate_password_policy配置，指定密码策略
# 选择0（LOW），1（MEDIUM），2（STRONG）其中一种，选择2需要提供密码字典文件
validate_password_policy=0
如果不需要密码策略，添加my.cnf文件中添加如下配置禁用即可：
validate_password = off
重新启动mysql服务使配置生效：
systemctl restart mysqld
6、添加远程登录用户
默认只允许root帐户在本地登录，如果要在其它机器上连接mysql，必须修改root允许远程连接，或者添加一个允许远程连接的帐户，为了安全起见，我添加一个新的帐户：
mysql> GRANT ALL PRIVILEGES ON *.* TO 'yangxin'@'%' IDENTIFIED BY 'Yangxin0917!' WITH GRANT OPTION;
7、配置默认编码为utf8
修改以前如下所示：
mysql> show variables like '%character%';
+--------------------------+----------------------------+
| Variable_name | Value |
+--------------------------+----------------------------+
| character_set_client | utf8 |
| character_set_connection | utf8 |
| character_set_database | latin1 |
| character_set_filesystem | binary |
| character_set_results | utf8 |
| character_set_server | latin1 |
| character_set_system | utf8 |
| character_sets_dir | /usr/share/mysql/charsets/ |
+--------------------------+----------------------------+
8 rows in set (0.00 sec)
修改/etc/my.cnf配置文件，在[mysqld]下添加编码配置，如下所示：
[mysqld]
character_set_server=utf8
init_connect='SET NAMES utf8'
重新启动mysql服务，查看数据库默认编码如下所示：
mysql> show variables like '%character%';
+--------------------------+----------------------------+
| Variable_name | Value |
+--------------------------+----------------------------+
| character_set_client | utf8 |
| character_set_connection | utf8 |
| character_set_database | utf8 |
| character_set_filesystem | binary |
| character_set_results | utf8 |
| character_set_server | utf8 |
| character_set_system | utf8 |
| character_sets_dir | /usr/share/mysql/charsets/ |
+--------------------------+----------------------------+
8 rows in set (0.00 sec)
——————————————————————————————
默认配置文件路径：
配置文件：/etc/my.cnf
日志文件：/var/log/mysqld.log
服务启动脚本：/usr/lib/systemd/system/mysqld.service
socket文件：/var/run/mysqld/mysqld.pid
==========================================
我在阿里云香港的机器上使用此方法安装，在修改root密码和默认编码后，重启mysql出现问题，报错
- 2016-01-31T13:47:52.934154Z 0 [ERROR] InnoDB: Operating system error number 13 in a file operation.
- 2016-01-31T13:47:52.934209Z 0 [ERROR] InnoDB: The error means mysqld does not have the access right
- s to the directory.
- 2016-01-31T13:47:52.934221Z 0 [ERROR] InnoDB: os_file_get_status() failed on './ibdata1'. Can't det
- ermine file permissions
- 2016-01-31T13:47:52.934232Z 0 [ERROR] InnoDB: Plugin initialization aborted with error Generic error
- 2016-01-31T13:47:53.539845Z 0 [ERROR] Plugin 'InnoDB' init function returned error.
- 2016-01-31T13:47:53.539899Z 0 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
- 2016-01-31T13:47:53.539913Z 0 [ERROR] Failed to initialize plugins.
- 2016-01-31T13:47:53.539919Z 0 [ERROR] Aborting
遇到如上问题，你需要
vi /etc/selinux/config
修改SELINUX的值为
SELINUX=permissive
重启你的机器后就可以启动你的mysql了，别问我为什么，我也不知道（权限问题）